001_%EC%88%98%EC%A0%95.jpg)
Fax Voip T38 |BEST| Keygen 13
Download File >>> https://urllio.com/2t7BDR
CFE version cfe.d081.5003 for BCM96358 (32bit,SP,BE)Build Date: Wed Nov 11 10:36:35 CST 2009 (Lihua_68693)Copyright (C) 2006 Huawei Technologies Co. Ltd.Boot Address 0xbe000000Initializing Arena.Initializing Devices.@w45260: Flash Manufacture id :c2@w45260Flash Device id :2201@w45260flipCFIGeometry:1Parallel flash device: name , id 0x2201, size 16384KB*** GetHG556aBoardVersion = ***CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHzTotal memory: 67108864 bytes (64MB)Total memory used by CFE: 0x80401000 - 0x8052A510 (1217808)Initialized Data: 0x8041F3C0 - 0x80421B60 (10144)BSS Area: 0x80421B60 - 0x80428510 (27056)Local Heap: 0x80428510 - 0x80528510 (1048576)Stack Area: 0x80528510 - 0x8052A510 (8192)Text (code) segment: 0x80401000 - 0x8041F3B4 (123828)Boot area (physical): 0x0052B000 - 0x0056B000Relocation Factor: I:00000000 - D:00000000*** GetHG556aBoardVersion = ***Board IP address : 192.168.1.1 Host IP address : 192.168.1.100 Gateway IP address : Run from flash/host (f/h) : f Default host run file name : vmlinux Default host flash file name : bcm963xx_fs_kernel Boot delay (0-9 seconds) : 1 Board Id Name : HW556 Psi size in KB : 64Number of MAC Addresses (1-32) : 14 Base MAC Address : 5c:4c:a9:6e:4a:a2 Ethernet PHY Type : InternalMemory size in MB : 64CMT Thread Number : 1*** Press any key to stop auto run (1 seconds) ***Auto run second count down: 110boot kernel from be9b2100Code Address: 0x80010000, Entry Address: 0x8022a018Decompression OK!Entry at 0x8022a018Closing network.Starting program at 0x8022a018Linux version 2.6.8.1 (root@IBM_x346) (gcc version 3.4.2) #2 Wed Jun 9 14:58:23 CST 2010@w45260: Flash Manufacture id :c2@w45260Flash Device id :2201@w45260flipCFIGeometry:1Parallel flash device: name , id 0x2201, size 16384KBTotal Flash size: 16384K with 128 sectorsBoard id is set HW556, ucHardwareType 0fInfo.flash_wlanparam_start_blk = 119fInfo.flash_wlanparam_number_blk = 1fInfo.flash_wlanparam_length = 0x2000fInfo.flash_wlanparam_blk_offset = 0x1e000HW556 prom initCPU revision is: 0002a010Determined physical RAM map: memory: 03f91920 @ 00000000 (usable)On node 0 totalpages: 16273 DMA zone: 16273 pages, LIFO batch:3 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1Built 1 zonelistsKernel command line: root=31:0 ro noinitrdbrcm mips: enabling icache and dcache...Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.Primary data cache 16kB 2-way, linesize 16 bytes.PID hash table entries: 256 (order 8: 2048 bytes)Using 150.000 MHz high precision timer.Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)Allocating memory for DSP module core and initialization codeAllocated DSP module memory - CORE=0x81099cc0 SIZE=732896, INIT=0x0 SIZE=0Memory: 61212k/65092k available (1828k kernel code, 3816k reserved, 319k data, 76k init, 0k highmem)Calibrating delay loop... 299.00 BogoMIPSMount-cache hash table entries: 512 (order: 0, 4096 bytes)Checking for 'wait' instruction... unavailable.softirq policy:0softirq nice:0, prio:120NET: Registered protocol family 16Can't analyze prologue code at 801d7a94SCSI subsystem initializedusbcore: registered new driver usbfsusbcore: registered new driver hubNTFS driver 2.1.15 [Flags: R/O].Initializing Cryptographic APIPPP generic driver version 2.4.2NET: Registered protocol family 24Using noop io schedulerbcm963xx_mtd driver v1.0PCI: Enabling device 0000:00:0a.0 (0000 -> 0002)ehci_hcd 0000:00:0a.0: EHCI Host ControllerPCI: Setting latency timer of device 0000:00:0a.0 to 64ehci_hcd 0000:00:0a.0: irq 18, pci mem c0000300ehci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1PCI: cache line size of 32 is not supported by device 0000:00:0a.0ehci_hcd 0000:00:0a.0: USB f.f enabled, EHCI 1.00, driver 2004-May-10hub 1-0:1.0: USB hub foundhub 1-0:1.0: 2 ports detectedohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)ohci_hcd: block sizes: ed 64 td 64PCI: Enabling device 0000:00:09.0 (0000 -> 0002)ohci_hcd 0000:00:09.0: OHCI Host ControllerPCI: Setting latency timer of device 0000:00:09.0 to 64ohci_hcd 0000:00:09.0: irq 13, pci mem c0002400ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2hub 2-0:1.0: USB hub foundhub 2-0:1.0: 2 ports detectedusbcore: registered new driver usblpdrivers/usb/class/usblp.c: v0.13: USB Printer Device Class driverInitializing USB Mass Storage driver...usbcore: registered new driver usb-storageUSB Mass Storage support registered.drivers/usb/serial/usb-serial.c: USB Serial support registered for Genericusbcore: registered new driver usbserial_genericusbcore: registered new driver usbserialdrivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0brcmboard: brcm_board_init entrySES: Button GPIO 0x8009 is enabledSES: LED GPIO 0x8009 is enabled@@Board@@ GetHarewareType = 0x0bcm963xx_serial driver v2.0u32 classifierNET: Registered protocol family 2IP: routing cache hash table of 512 buckets, 4KbytesTCP: Hash tables configured (established 4096 bind 8192)Initializing IPsec netlink socketNET: Registered protocol family 1NET: Registered protocol family 17NET: Registered protocol family 15Ebtables v2.0 registeredNET: Registered protocol family 8NET: Registered protocol family 20802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller cfi_flash_sched_init!!!VFS: Mounted root (squashfs filesystem) readonly.Freeing unused kernel memory: 76k freedusb 1-1: new high speed USB device using address 2hub 1-1:1.0: USB hub foundhub 1-1:1.0: 2 ports detectedinit started: BusyBox v1.00 (2010.06.09-07:05+0000) multi-call binaryAlgorithmics/MIPS FPU Emulator v1.5BusyBox v1.00 (2010.06.09-07:05+0000) Built-in shell (msh)Enter 'help' for a list of built-in commands.Loading drivers and kernel modules... fuse init (API version 7.8)fuse distribution version: 2.7.3atmapi: module license 'Proprietary' taints kernel.blaadd: blaa_detect entryadsl: adsl_init entryBroadcom BCMPROCFS v1.0 initializedBroadcom BCM6358A1 Ethernet Network Device v0.3 Jul 14 2010 19:38:55Config Ethernet Switch Through MDIO Pseudo PHY Interfacedgasp: kerSysRegisterDyingGaspHandler: eth0 registered eth0: MAC Address: 5C:4C:A9:6E:4A:A2DSP Driver: DSP init stubEndpoint: endpoint_init entryBOS: Enter bosInit Enter bosAppInit Exit bosAppInit BOS: Exit bosInit Endpoint: GetHarewareType Endpoint: endpoint_init COMPLETEDdrivers/usb/serial/usb-serial.c: USB Serial support registered for option1usbcore: registered new driver optiondrivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1147eth0 Link UP.ip is 192.168.0.1mask is 255.255.255.0, ipbegin is 192.168.0.192, ipend is 192.168.0.254===7163=attrvalue is 2 set to 104===7163=attrvalue is 2 set to 104xmlGetDhcpHostNameNode(appName dhcphostname, objName Entry, attrName option12, attrValue Huawei-HG556a==MTU:psixml.cpp:xmlStartPppObjNode:14260:Mtu is 1492==xmlEndIgmpProxyNode(calling cfm to get appName igmpproxy, objName proxy_node)==MTU:psixml.cpp:xmlStartPppObjNode:14260:Mtu is 1492====IpExt:psixml.cpp:xmlGetPppAttr:14204:mac is ==value is 0BcmDb_setSecEnblCfg :fw_enable 0, inflt 0, outflt 0, macflt 0, macmngr 0, nat_enable 1===7163=attrvalue is 2 set to 104===7163=attrvalue is 2 set to 104xmlGetDhcpHostNameNode(appName dhcphostname, objName Entry, attrName option12, attrValue Huawei-HG556a==MTU:psixml.cpp:xmlStartPppObjNode:14260:Mtu is 1492==xmlEndIgmpProxyNode(calling cfm to get appName igmpproxy, objName proxy_node)==MTU:psixml.cpp:xmlStartPppObjNode:14260:Mtu is 1492====IpExt:psixml.cpp:xmlGetPppAttr:14204:mac is ==value is 0BcmAdsl_Initialize=0xC0066438, g_pFnNotifyCallback=0xC007F3F4AnnexCParam=0x7FFF7EA8 AnnexAParam=0x00003987 adsl2=0x00000003pSdramPHY=0xA3FFFFF8, 0x150EA5 0xDEADBEEFAdslCoreHwReset: AdslOemDataAddr = 0xA3FFBB64AnnexCParam=0x7FFF7EA8 AnnexAParam=0x00003987 adsl2=0x00000003dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered atmapi: prioritize receive packetsip_tables: (C) 2000-2002 Netfilter core teamip_conntrack version 2.1 (508 buckets, 0 max) - 368 bytes per conntrackip_conntrack_pptp version 2.1 loadedip_nat_pptp version 2.0 loaded==> Bcm963xx Software Version: V100R001C10B050SP01 0002)Chan Freq RegPwr HT CTL CTL_U CTL_L DFS 1 2412n 20 HT20 1 0 1 N 1 2412n 20 HT40 1 0 1 N 2 2417n 20 HT40 1 0 1 N 3 2422n 20 HT40 1 1 1 N 4 2427n 20 HT40 1 1 1 N 5 2432n 20 HT40 1 1 1 N 6 2437n 20 HT40 1 1 1 N 7 2442n 20 HT40 1 1 1 N 8 2447n 20 HT40 1 1 1 N 9 2452n 20 HT40 1 1 1 N 10 2457n 20 HT40 1 1 1 N 11 2462n 20 HT40 1 1 1 N 12 2467n 20 HT40 1 1 0 N 13 2472n 20 HT40 1 1 0 Ndfs_init_radar_filters: dfs->dfs_rinfo.rn_numradars: 0DFS min filter rssiThresh = 21DFS max pulse dur = 131 tickswifi0: 11ng rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbpswifi0: 11ng MCS: 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15wifi0: mac 47.2 phy 13.0 radio 12.0wifi0: Use hw queue 1 for WME_AC_BE trafficwifi0: Use hw queue 0 for WME_AC_BK trafficwifi0: Use hw queue 2 for WME_AC_VI trafficwifi0: Use hw queue 3 for WME_AC_VO trafficwifi0: Use hw queue 8 for CAB trafficwifi0: Use hw queue 9 for beaconswifi0: Use hw queue 7 for UAPSDwifi0: Atheros 5416 Owl emulation: mem=0x10000000, irq=39 hw_base=0xb0000000wlan: mac acl policy registeredWlanSetupAll startkillall: hostapd: no process killedSIOCGIFFLAGS: No such devicewlanconfig: ioctl: No such devicewlNBwCap[1]wlNCtrlsb[-1]Set WLAN Radio = 1==DEBUG==Atheros_SetupOneVAP,4427==bWpaPskMode:1,m_wlMssidVar[AthIndex].wlWep:disabled.2xMaxPowerLevel: 30 (LEG)2xMaxPowerLevel: 28 (LEG)ath0Setting Max Stations:332xMaxPowerLevel: 28 (LEG)2xMaxPowerLevel: 28 (LEG)ath_newstate: Resetting VAP dfswait_run2xMaxPowerLevel: 28 (LEG)ath_chan_set: Changing to channel 2412, Flags 10080, PF 0device ath0 entered promiscuous modebr0: port 2(ath0) entering learning statebr0: topology change detected, propagatingbr0: port 2(ath0) entering forwarding state2xMaxPowerLevel: 28 (LEG)ath_chan_set: Changing to channel 2412, Flags 30080, PF 02xMaxPowerLevel: 28 (LEG)ath_chan_set: Changing to channel 2417, Flags 30082, PF 02xMaxPowerLevel: 28 (LEG)ath_chan_set: Changing to channel 2422, Flags 30082, PF 0br0: port 2(ath0) entering disabled stateSend SIG(1) to pid 402 on eth down2xMaxPowerLevel: 28 (LEG)ath_newstate: Resetting VAP dfswait_runbr0: port 2(ath0) entering learning state2xMaxPowerLevel: 28 (LEG)ath_chan_set: Changing to channel 2412, Flags 10080, PF 0br0: topology change detected, propagatingbr0: port 2(ath0) entering forwarding stateE+E+E+E+E+hostapd is running.2xMaxPowerLevel: 28 (LEG)ath_chan_set: Changing to channel 2412, Flags 30080, PF 0register normal.SIP: can't Retrieve psi object 11 in app Voice when DialPlan table size loading, errno 3SIP: can't Retrieve psi object 13 in app Voice when CallForward table size loading, errno 32xMaxPowerLevel: 28 (LEG)ath_chan_set: Changing to channel 2417, Flags 30082, PF 0iptables: Bad rule (does a matching rule exist in that chain?)iptables: Bad rule (does a matching rule exist in that chain?)2xMaxPowerLevel: 28 (LEG)ath_chan_set: Changing to channel 2422, Flags 30082, PF 0original call init_spanish_mibiptables: Bad rule (does a matching rule exist in that chain?)iptables: Bad rule (does a matching rule exist in that chain?)2xMaxPowerLevel: 28 (LEG)ath_chan_set: Changing to channel 2427, Flags 30082, PF 02xMaxPowerLevel: 28 (LEG)ath_chan_set: Changing to channel 2432, Flags 30082, PF 02xMaxPowerLevel: 28 (LEG)ath_chan_set: Changing to channel 2437, Flags 30082, PF 02xMaxPowerLevel: 28 (LEG)ath_chan_set: Changing to channel 2442, Flags 30082, PF 0BOS: Enter bosInit bosTimerInit2xMaxPowerLevel: 28 (LEG)ath_chan_set: Changing to channel 2447, Flags 30082, PF 0Enter bosAppInit Exit bosAppInit BOS: Exit bosInit 2xMaxPowerLevel: 28 (LEG)ath_chan_set: Changing to channel 2452, Flags 30082, PF 02xMaxPowerLevel: 28 (LEG)ath_chan_set: Changing to channel 2457, Flags 30082, PF 02xMaxPowerLevel: 28 (LEG)ath_chan_set: Changing to channel 2462, Flags 30082, PF 0[DMM]:Endpoit(3) receives an error digitmap string!, file = Dmm.c, line = 2371 UNSPT^2xMaxPowerLevel: 28 (LEG)ath_chan_set: Changing to channel 2467, Flags 30082, PF 0SipMsgThread MsgThread pid=605------------------------------------------------------------ at 946684845.994999 *** Received signal 18 on thread with PID 601------------------------------------------------------------------------------------------------------------------------ at 946684846.059999 *** Received signal 18 on thread with PID 601------------------------------------------------------------------------------------------------------------------------ at 946684846.124999 *** Received signal 18 on thread with PID 601------------------------------------------------------------2xMaxPowerLevel: 28 (LEG)ath_chan_set: Changing to channel 2472, Flags 30082, PF 0------------------------------------------------------------ at 946684846.199999 *** Received signal 18 on thread with PID 601------------------------------------------------------------Process[voice] set voip status to [1]Process[voice] set voip status to [0]ath_newstate: Resetting VAP dfswait_run2xMaxPowerLevel: 28 (LEG)ath_chan_set: Changing to channel 2412, Flags 10080, PF 0kernel::endpoint_openkernel::endpoint_open COMPLETEDPstnInit Success!Created queue HDSP 00:00:46 CALLCLIENT: Initializing endpoints callSipClientMainvoipqosapi: sendto returned -1sipConfig: sipzParamp=0x7fff7150 sipzParamp->regname= line 59 file hsip.csipConfig: sipzParamp=0x7fff7150line 69 file hsip.csipConfig: &mgscb=0x1000e9f0line 82 file hsip.c00:00:46 CALLCLIENT: Initializing endpoints00:00:46 Endpoint will be initialized for country ESP (country code = 17)00:00:46 Endpoint Event task started with pid 628...00:00:46 Endpoint Packet task started with pid 629 ...Enter bosStartAppbosAppRootTask() - Is it morning already? Spawning app task (epoch #0)...bosAppRootTask() - Is it morning already? Spawning app task (epoch #0)...Enter TaskCreate aoAPTaskCreate - spawn new task aoAPExit TaskCreate AppResetDetectionEnable() - Enabled reset detection.Exit bosStartAppPLL init completed. PLL registers set to:PCM->pcm_pll_ctrl1 = 0x00020001 PCM->pcm_pll_ctrl2 = 0x0008492B PCM->pcm_pll_ctrl3 = 0x00001E1C Set up PCM registersChannel 0 assigned to timeslot 0Channel 1 assigned to timeslot 8Channel 2 assigned to timeslot 1Channel 3 assigned to timeslot 9Channel 4 assigned to timeslot 2Tx Desc (0xA29DE000): chan 0, buf 0, sts 0xe000, len 1280, bufp 0x29f4000 Tx Desc (0xA29DE008): chan 0, buf 1, sts 0x7000, len 1280, bufp 0x29f4510 Rx Desc (0xA28FF000): chan 0, buf 0, sts 0x8000, len 1280, bufp 0x36b7000 Rx Desc (0xA28FF008): chan 0, buf 1, sts 0x9000, len 1280, bufp 0x36b7510 initIudma: chan 0, descBase 0xa28ff000, descBaseIudma 0x28ff000initIudma: chan 1, descBase 0xa29de000, descBaseIudma 0x29de000PCM ENABLE INFO: DMA0 IRQ STATUS 0x00000000PCM ENABLE INFO: DMA0 IRQ MASK 0x00000005PCM ENABLE INFO: DMA1 IRQ STATUS 0x00000000PCM ENABLE INFO: DMA1 IRQ MASK 0x00000005PCM ENABLE INFO: PCM IRQ MASK 0x00000003PCM ENABLE INFO: PCM IRQ PENDING 0x00000007Enter TaskCreate CMT_EXCEPTION_ISTTaskCreate - spawn new task CMT_EXCEPTION_ISTExit TaskCreate regStatus (reg 12 sel 0) = 0x10008501 regStatus (reg 12 sel 7) = 0x00000101 regCause (reg 13 sel 0) = 0x00000000 regCause (reg 13 sel 7) = 0x00808000 regCMT (reg 22 sel 0) = 0xe30e1006 regCMT (reg 22 sel 1) = 0xe8008003 Kicking off secondary thread processor at entry point 0x81099D00...Secondary thread processor entry point at 0x81099d00Thread processor handshake. Secondary app initialized properly.Enter TaskCreate HTSKTaskCreate - spawn new task HTSKExit TaskCreate SUCCESS: Took semaphoreSUCCESS: Gave semaphoreINFO: MSPI POLLING MODEINFO: IRQ MASK 0xa0020424INFO: IRQ STATUS 0x400000INFO: BLOCK ENABLES 0x3e0320MSPI INITIALIZEDHG55VDFA DoControlRelayStatus: disconnect PSTN relay#########slicLe88221CalDcDc=CH[0]Read data from Rev ID register: 0x04, 0xB3@@@@@@@@@@@@SWcal=[0x1]####normalChan0Cal: 0x08 normalChan1Cal: 0x08DAA rstGpioPin=25, rlyGpioPin=14 DAA DBG: DAA read failed!!! DAA DBG: ISOCAP lock count = 0 Si3050 SLAC Initialised, Line side device = Si: 3010 (0xf)System dev rev: 0xf, Line dev rev: 0xfLine dev status: FDT:0x1, LCS: 0x1fDAA initialized with country code 17Detect FXO Chip Failed...Skip daa6358Si3050SetFlyMode due to Not Si3050 Detected.DAA Device Init completed...[19:38:34]Initialized DAA driver functions at location 0xc0205968boardHalInit6358: Initialization complete.boardHalInit completedEnter TaskCreate HRTBEATTaskCreate - spawn new task HRTBEATExit TaskCreate HEARTBEAT: Initialized!g_iRtcpInterval = 3000bosMsgQCreate: Created message queue VRGEVQ at address 0x6000c Enter TaskCreate VRGEVPRTaskCreate - spawn new task VRGEVPRExit TaskCreate Enter TaskCreate HCASTaskCreate - spawn new task HCASExit TaskCreate Enter TaskCreate DMAWTaskCreate - spawn new task DMAWExit TaskCreate *** gStartRxDesc[0] = 0xA28FF000 *** gBufferSizeBytes = 1280 *** gStartTxDesc[0] = 0xA29DE000 hal6358PcmInit 263 nextTxDesc = 0xA29DE000 hal6358PcmInit 263 nextTxDesc = 0xA29DE008 hal6358PcmInit 267 Ownership for TX desc not set. Use this buffer. PERF->IrqMask = 0xA0020424 PERF->IrqMask1 = 0x00800000 Default value for provItemId '226' did not existENDPT: hdspVhdOpen Secondary Connection VHD success. DSP 0, VHD (0x50) of type: 0x0ENDPT: Setting T.38 error correction mode for vhd 80 to 0x104ENDPT: hdspVhdOpen Secondary Connection VHD success. DSP 0, VHD (0x51) of type: 0x0ENDPT: Setting T.38 error correction mode for vhd 81 to 0x104ENDPT: hdspVhdOpen Secondary Connection VHD success. DSP 0, VHD (0x52) of type: 0x0ENDPT: Setting T.38 error correction mode for vhd 82 to 0x104ENDPT: hdspVhdOpen Secondary Connection VHD success. DSP 0, VHD (0x53) of type: 0x0ENDPT: Setting T.38 error correction mode for vhd 83 to 0x104bosMsgQCreate: Created message queue PSTN_CTL_EVQ at address 0x6800d Enter TaskCreate PSTNTaskCreate - spawn new task PSTNExit TaskCreate pstnCtlInit successfuldgasp: kerSysRegisterDyingGaspHandler: endpoint registered @@DoVrgEndptInit reInjecitonMode=.00:00:50 Enter vrgEndptCasTimeParamControl... minHookFlash = 80, maxHookFlash = 250.ENDPT: EPTYPE_FXSENDPT: hdspVhdOpen Line VHD success. DSP 0, VHD (0x54) of type: 0x7Default value for provItemId '74' did not existDefault value for provItemId '75' did not existminHookFlash = 80.maxHookFlash = 250.Default value for provItemId '217' did not existDefault value for provItemId '41' did not existDefault value for provItemId '66' did not existDefault value for provItemId '58' did not existDefault value for provItemId '219' did not existENDPT: Initialization completed successfully for endpt 000:00:50 SIGNAL: endpt 0, cnx -1, evt 111 (TxGain), value 000:00:50 SIGNAL: endpt 0, cnx -1, evt 112 (RxGain), value 0ENDPT: EPTYPE_FXSENDPT: hdspVhdOpen Line VHD success. DSP 0, VHD (0x55) of type: 0x7Default value for provItemId '74' did not existDefault value for provItemId '75' did not existminHookFlash = 80.maxHookFlash = 250.Default value for provItemId '217' did not existDefault value for provItemId '41' did not existDefault value for provItemId '66' did not existDefault value for provItemId '58' did not existDefault value for provItemId '219' did not existENDPT: Initialization completed successfully for endpt 100:00:51 SIGNAL: endpt 1, cnx -1, evt 111 (TxGain), value 000:00:51 SIGNAL: endpt 1, cnx -1, evt 112 (RxGain), value 0ENDPT: EPTYPE_PSTNENDPT: hdspVhdOpen PSTN VHD success. DSP 0, VHD (0x56) of type: 0x6ENDPT: hdspVhdOpen Line VHD success. DSP 0, VHD (0x57) of type: 0x7Default value for provItemId '74' did not existDefault value for provItemId '75' did not existminHookFlash = 80.maxHookFlash = 250.Default value for provItemId '217' did not existDAA driver * for chan 2 is c0244f90Default value for provItemId '58' did not existDefault value for provItemId '219' did not existDAA driver * for chan 2 is c0244f90DAA driver * for chan 2 is c0244f90DAA: Skip cmd[1] due to on the fly ,...ENDPT: Initialization completed successfully for endpt 200:00:51 RTP read thread started with pid 639 00:00:51 RTP read thread started with pid 640 00:00:51 RTP read thread started with pid 641 00:00:51 RTP read thread started with pid 642 00:00:51 RTCP thread started with pid 643 00:00:51 rtpInit: RTCP task created, taskId = 1435100:00:51 ccPstnInit: Init PSTN module with dial-plan = 00:00:51 gwPstnSignal: signal-67, action-0x1, value--1 ENDPT: Enable PSTN EC. ENDPT: ECAN Enabled for endpt 200:00:51 gwPstnSignal (call setup): value = 00:00:51 gwPstnSignal: signal-63, action-0x554890, value--1 vrgEndptSignal (EPSIG_PSTNCALLSETUP) 00:00:51 gwPstnSignal: signal-66, action-0x1, value--1 CMTD_CTL: Using default settingsCMTD_CTL: setFilterCoeff: filtSize79Seized PSTN line 2ConnectSB: connecting line2 and line0 DAA: Skip cmd[2] due to on the fly ,...00:00:51 gwPstnSignal: signal-68, action-0x1, value--1 ENDPT: Disable PSTN EC. ENDPT: ECAN disabled for endpt 200:00:51 gwPstnSignal: signal-65, action-0x1, value--1 Released PSTN line 2DisconnectSB: disconnecting line0 and line2 DAA: Skip cmd[0] due to on the fly ,...00:00:51 CALLCLIENT: Initialization complete callSipClientMain00:00:51 ccPublishSipEventCB: event 0 PSTN_CTL: cmtdCtlConfigFilter success vhd=0x56Enter TaskCreate TM56TaskCreate - spawn new task TM56Exit TaskCreate PSTN_CTL: timerTaskMain timer task started, timeout = 5000Get Resource file size = [779725]@@@@Voice@@@FXO Chip Dectected result = .00:00:53 ====== HSPA voice Read Thread start ====== ======start No voice process 10 times=====mkdir: Cannot create directory `/var/mnt/USBDisk_1/twonkymedia.db': No such file or directoryDLNA:syscall.c:startDlna:5682:twonkymedia.db can't be created![10]initDeviceAssociation(entry): BcmCfm_ManageableDeviceTbl 0initDeviceAssociation(): fopen /var/udhcpd/manageable.device failed): return errorkill: Could not kill pid '65535': No such processScratch pad is not initialized.Enter TaskEnterShutdown (task=TM56) Exit TaskEnterShutdown (task=TM56) Enter bosTaskDestoryR, taskId = 82a38928PSTN_CTL: cmtdCtlDisable success vhd=0x56PstnEventCallback: PSTN_CTL_EVT_CPTONE_TIMEOUTNo scratch pad found. Initialize scratch pad...telnet function started!==DHCPD:files.c:write_dnsconf:498:====DHCPD:files.c:write_dnsconf:523:BUF[address=/#/192.168.0.1]==Can't get dns's pidURL Filer: open rule file failed!==DNS:option.c:read_opts:2064:conffile is /var/dnsmasq.conf====DNS:option.c:one_file:1870file is /var/dnsmasq.conf:====DNS:option.c:one_opt:968:arg is /#/192.168.0.1==BcmWL_createAutoCfgSwTsk Called...BcmWL_createAutoCfgSwTsk Success[1026]...Sean@WLAN CHIP Vendor=, ProductId===HTTPD:httpd.c:webmain:2996:ATHEROS:VHG====MTU:ifcuiweb.cpp:BcmWeb_getWanConInfo:1350:1492,1492,==NTWK_INTF wanObjIndex=2, attachToIndex=1IFC_ATM_VCC =255/65535NTWK_INTF wanObjIndex=3, attachToIndex=2IFC_ATM_VCC =0/44NTWK_INTF wanObjIndex=4, attachToIndex=3IFC_ATM_VCC =0/34Flash Write confliction, wait...Flash Write confliction, wait...Line:150=====start up mac=5c:4c:a9:6e:4a:a2Line:153=====syspwd=VF-EShg556Flash Write confliction, wait...Flash Write confliction, wait...NTWK_INTF wanObjIndex=5, attachToIndex=4IFC_ATM_VCC =0/33Flash Write confliction, wait...Flash Write confliction, wait...language option, user:es_ES admin:en_USIFC_ATM_VCC =255/65535IFC_ATM_VCC =0/44IFC_ATM_VCC =0/34IFC_ATM_VCC =0/33SSDP server socket OK!Found INETFound INETDevice=br0nmbd: not foundInit port is 80bcmIsDataPvc: ppp_255_65535_1 data ifcCwmp initing...paraattribute name is HG553VFbcmIsDataPvc: nas_0_44 data ifc(Data)PPP@WLAN CHIP Vendor=, ProductId=Voice channel Query[CwmpReadLoadInfoFromFlash,230]=======acTmp:ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ========[CwmpReadLoadInfoFromFlash,245]=======pulErrCode:0,pcCmdkey:==========DEBUG==BcmSipRegisterQuery 7426==stsOld:0,stsHspa:0,iHspaDomain:0,usVoiceChannel:1,iSipChannel:0,iVoiceRegister:0,glbAdslRegState:0,glbHspaRegState:0sDeviceCount is 0 sSimExist is -1Voice channel Query==DEBUG==BcmSipRegisterQuery 7426==stsOld:0,stsHspa:0,iHspaDomain:0,usVoiceChannel:1,iSipChannel:0,iVoiceRegister:0,glbAdslRegState:0,glbHspaRegState:0sDeviceCount is 0 sSimExist is -1sigWanDownProcesscDataMode is 0AdslCoreEcUpdTmr: timeMs=1800225 ecUpdMask=0x40000 2b1af7f3a8